SimplyCam 是一個完全整合的 2D CAD/CAM 系統，可以直接打開、創建、編輯和保存產業標準 DXF 格式的圖紙。 SimplyCam 還透過繪製中心線和輪廓將柵格圖像（Bmp 和 Jpeg）轉換為向量。 SimplyCam 允許操作向量（縮放、旋轉、鏡像、移動、偏移），以創建具有"直線"、矩形、弧形/橢圓、折線和樣條線的 cad 繪圖，以及使用圓角、修剪、中斷、擴展和爆炸塊功能修改圖形。 SimplyCam 還將任何真類型字體轉換為向量。 SimplyCam 最多可以使用 256 層。以下屬性可以應用於每個圖層：顏色、筆寬、可見實體以及從另一層移動到圖層。 SimplyCam 現在為銑削、布線、水噴射、鐳射和等離子提供 CNC Gcode。 SimplyCam 可以導入 NC 程式並類比它。僅讀取常規銑削的 G0、G1、G2 和 G3 命令。 SimplyCam 包含大量開放後處理器，例如： 自動格拉夫， 法努克， 法達爾， 哈斯， 海德海因， 伊索， 馬赫 2 / 3， Maxnc， 塞爾卡， 西門子， 商店機器人， 特克諾島， 渦輪...
版本歷史記錄
- 版本 3.66 發佈於 2020-01-24
軟體細節
終端使用者許可協定
END USER LICENSE AGREEMENT FOR SIMPLYCAM v2.x Copyright 2006-2013 MR Soft Software License You have the right to use the number of licenses of the enclosed program, which you have bought from MR Soft. You may not distribute copies of the program or related documentation to any persons or companies. You may not modify or translate the program or related documentation without the prior consent of MR Soft. Disclaimer of all Warranties and Liability MR Soft makes no warranties, either express or implied, with respect to the software, its quality, performance, merchantability, or fitness for any particular purpose. The entire risk as to its quality and performance is with the buyer. Should the SimplyCam software prove defective following its purchase, the buyer (and not MR Soft, its distributor, or its retailer) assumes the entire cost of all necessary servicing, repair, of correction and any incidental or consequential damages. In no event will MR Soft be liable for direct, indirect, or consequential damages resulting from any defect in the software, even if MR Soft has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. Notice MR Soft reserves the right to make improvements to the SimplyCam Software at any time and without notice.