網格展開器是一個專門的工程 3D CAD 系統，用於導入和展開用於製造或製造的板材設計。曲面網格幾何體從在 CAD 系統中（如 Autocad）中建立的 DXF、STL、OBJ 或 WAV 檔導入，然後展開（即拼合），以生成最佳結果平面 2D 結果。導入的網格通常是 3D 曲面。展開時，它將被處理成"最不張力"的 2D 圖案形狀，將形成 2D 圖案所需的變形均勻化為 3D 形狀。網格展開器可用於展開網格的許多不同的應用，如鈑金，充氣，船板，鞋，帳篷，不裝潢，衣服，航空翼等。導入網格后，如果需要，可以拆分和編輯網格，這通常是為了更有效地拼合。或者，網格展開器還可用於簡單的數據轉換、載入受支援的文件類型和匯出大多數 CAD 系統支援的 DXF。
版本歷史記錄
- 版本 3.01 發佈於 2012-05-21
3D 網格匯入、編輯和展開 - 版本 2.0 發佈於 2007-08-02
3D 面模型導入
軟體細節
- 軟體分類： 圖形應用 > Cad
- 發佈者： RevCAD Ltd
- 軟體性質： 免費試用
- 價格： $75.00
- 版本： 3.01
- 作業系統： windows
終端使用者許可協定
Notification of Copyright THIS SOFTWARE PROGRAMME ("SOFTWARE") IS A PROPRIETARY PRODUCT OF REVCAD SOFTWARE ("THE DEVELOPER") AND IS PROTECTED BY COPYRIGHT AND OTHER LAWS. The demonstration version of the Software has limited functionality and is distributed and licensed as SHAREWARE for evaluation only. The FULL VERSION OF THE SOFTWARE MUST NOT BE DISTRIBUTED and must be HELD AND INSTALLED BY LICENSED USERS ONLY. Unauthorized users render themselves LIABLE as defined in the LIABILTY SECTION of this agreement (IMPORTANT - See Section 4 Below). 1. SOFTWARE LICENSE AGREEMENT - TERMS AND CONDITIONS THIS AGREEMENT IS A LEGAL CONTRACT BETWEEN YOU ("THE LICENSEE") AND REVCAD SOFTWARE GOVERNING YOUR USE OF THE SOFTWARE. PROCEEDING TO THE NEXT STAGE INDICATES YOUR ACCEPTANCE OF THIS AGREEMENT. IF YOU DO NOT WISH TO AGREE TO THE TERMS OF THIS AGREEMENT YOU MUST REMOVE ALL INSTALLATIONS OF THE SOFTWARE, YOU MUST NOT DISTRIBUTE THE SOFTWARE, AND YOU MUST DELETE ALL COPIES OF THE INSTALLATION FILES FROM YOU COMPUTER SYSTEMS. Under the shareware agreement you are licensed to use the demonstration version of the Software for EVALUATION and NON-PROFIT making purposes only, and for a limited EVALUATION PERIOD of 30 days. You can freely copy and distribute the complete and original demonstration package at no cost to you. YOU MUST NOT alter the executable files in any way and YOU MUST NOT re-package the Software or charge any fee, other than a nominal distribution cost, except by the express written consent of RevCAD Software. To obtain and use the full version of the Software for any COMMERCIAL, EDUCATIONAL or PROFIT MAKING purpose, or to use the demonstration software beyond the EVALUATION PERIOD of 30 days, YOU MUST REGISTER the program by PURCHASING an authorization key code from RevCAD Software. The provision of the authorization code by RevCAD Software and payment of the license fee grants you ('THE LICENSEE') to a non-exclusive license permitting unlimited use of the full version of the Software on a single installation (see next paragraph), for PERSONAL, COMMERCIAL, PROFIT MAKING and EDUCATIONAL purposes. Licenses granted to commercial or educational institutions limit the use of the Software to a SINGLE SITE. COMMERCIAL and PROFIT MAKING institutions MUST purchase a license FOR EACH SOFTWARE INSTALLATION or obtain a multiple user SITE LICENSE from RevCAD Software to authorize unlimited use of the software at specified site. The purchase of a site license for a single site authorizes unlimited installations of the Software at that site, or at multiple sites if specifically authorized by RevCAD Software. EDUCATIONAL institutions require an EDUCATIONAL SITE LICENSE to include use of the software in educational and training programmes and MUST notify REVCAD of the use of the software for education at the registered site. 2. COPYRIGHT OWNERSHIP AND CONFIDENTIALITY (a) The Software contains confidential information of RevCAD Software and all copyright trademarks design rights (registered or unregistered) and other intellectual property rights in the Software are the exclusive property of RevCAD Software. (b) The Licensee shall not: (i) reverse engineer, decompile, disassemble or create derivative works based on the Software. (ii) rent lease sub-license assign or transfer the Software or any part of it (c) The Licensee shall keep the Software for its sole use or the use by those of its employees who are properly engaged in the use of the Software and allow RevCAD Software unlimited use and access without payment to any modification or programmes created using the Software. 3. WARRANTY (a) RevCAD Software warrants that it has the rights and title to and owns the property in the Software (b) Save as aforesaid RevCAD Software gives no warranties and makes no representations whatsoever that the Software will be suitable for any particular purpose or for use under any particular conditions notwithstanding that such purpose or condition may be known or have been made known to RevCAD Software or that the operation of the Software will not be interrupted or will be error free (c) RevCAD Software accepts no responsibility for any mathematical or technical limitation of the Software it being the Licensees responsibility to check and verify all information produced by the Software in whatever form. (d) RevCAD Software shall not in any circumstances be liable for any special collateral incidental or consequential loss or damage in connection with or arising out of the use of the Software (e) Any liability of RevCAD Software to the Licensee in respect of any of the provisions of this Agreement shall be limited to damages only of an amount not exceeding the total purchase price of the Software paid by the Licensee (f) Subject to the foregoing all conditions, warranties, terms and undertakings expressed or implied statutory or otherwise in respect of the Software are hereby excluded. 4. LIABILITY - [IMPORTANT] UNAUTHORIZED USE of the FULL VERSION of the software SHALL RENDER THE USER LIABLE FOR ALL COMMERCIAL PROFITS DERIVED FROM THE UNAUTHORIZED USE OF THE SOFTWARE and for the FULL COST of the software. UNAUTHORISED use of the DEMONSTRATION version of the software SHALL RENDER USERS LIABLE FOR THE FULL COST OF THE SOFTWARE. Unauthorized ALTERATION or REPACKAGING of any version of the software or ANY PART OF THE PACKAGE distributed by RevCAD software shall RENDER THE OFFENDERS LIABLE IN FULL FOR ALL LOSS OF REVENUES caused to RevCAD Software. 5. TERMINATION (a) This Agreement shall be terminated forthwith by RevCAD Software if the Licensee commits any material breach of the terms of this Agreement (b) If the Licensee is in breach of this Agreement immediately following the termination of this Agreement the Licensee shall remove all installations of the Software and delete all copies of the Software and the Programme Documentation in its possession (c) These terms and all questions of construction validity and performance shall be governed by English law and the parties hereby submit to the non-exclusive jurisdiction of the English courts.